Ferrum Wandla Hi-End DAC
RM 12,299.00
Quantity
DESCRIPTION
| Operation: | Fully balanced, proprietary IC power amp | ||||
| DAC chip: | ESS Sabre ES9038PRO | ||||
| DAC resolution: | 768k/32bit, DSD 256 | ||||
| Digital inputs: | – AES/EBU (up to 196kHz/24bit, DoP 64) | ||||
| Optical S/PDIF (up t/24bit) | |||||
| – Coaxial S/PDIF (up to 192kHz/24bit, DoP 64) | |||||
| – USB-C (up to 768kHz/32bit, DSD 256) | |||||
| – ARC (up to 192kHz/24bit), TV input with CEC | |||||
| – I2S (up to 768kHz/32bit, DSD 256), PS Audio® compatible | |||||
| MQA®: | decoder and renderer (on all digital inputs) | ||||
| Analog inputs: | RCA | ||||
| Analog input Vmax: | 9,5V RMS (2 – 3,5V RMS recommended) | ||||
| Analogue input imp: | 47kΩ | ||||
| Line outputs: | balanced XLR; unbalanced RCA | ||||
| Volume control: | analogue with bypass option / digital for DAC operation only | ||||
| Output level: | @0dBFS, 1kHz sine 9,3V RMS balanced, 4,65V RMS unbalanced | ||||
| Frequency response: | 10Hz – 200kHz +/- 0,1dB | ||||
| analog inputs | |||||
| DAC THD: | -121dB (0,00009%); THD+N: -115dB (unweighted) | ||||
| Analog input THD: | -123dB @ 2V RMS output level | ||||
| Dyn. range analog: | 127dB (A-weighted) | ||||
| Dyn. range digital: | 127dB (A-weighted) | ||||
| Crosstalk: | -120dB for 1kHz, better than -100dB for 20Hz -20kHz | ||||
| Output impedance: | 22Ω unbalanced | ||||
| Output impedance: | 44Ω balanced | ||||
| Power consumption: | 10W idle / 15W max | ||||
| Power inputs: | 5,5/2,5 mm DC connector centre positive | ||||
| proprietary FPL 4-pin DC connector (FPL) | |||||
| 22-30VDC | |||||
| Power adapter: | 100-240 VAC to 24VDC | ||||
| Dimensions: | 21,7 x 20,6 x 5 cm | ||||
| (WxDxH) | 8.6 x 8.1 x 2.0 inch | ||||
| Weight: | 1,8 kg | ||||
| 3.97 lbs | |||||
